|
DELL
 

DELL Dell ReadyRails 1U Static Rails for 2/4-Post Racks

Dell ReadyRails 1U Static Rails for 2/4-Post Racks
Dell ReadyRails 1U Static Rails for 2/4-Post Racks
The ReadyRails™ static rail kit for 1U Systems, including PowerEdge R210, R310, R410, and R415, provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all ... Full Description
Call to Order
Dell ReadyRails 1U Static Rails for 2/4-Post RacksThe ReadyRails™ static rail kit for 1U Systems, including PowerEdge R210, R310, R410, and R415, provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all generations of Dell racks. It also supports tooled mounting in 4-post threaded racks and 2-post (Telco) racks for added versatility. The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Notes: Screws are not included in the static rail kit due to the fact that threaded racks are offered with a variety of thread designations. Users must therefore provide their own screws when mounting the static rails in threaded or 2-post racks.Compatible with:
  • PowerEdge R210 FS / R310 FS / R410 / R415
  • PowerVault NX300

Manufacturer Part# : W625M | Dell Part# : 770-BBIF
Highlights

  • Features a rack height of 1U/2U
  • Makes physical set-up of the hardware faster than ever before

Overview
The ReadyRails™ static rail kit for 1U Systems, including PowerEdge R210, R310, R410, and R415, provides tool-less support for 4-post racks with square or unthreaded round mounting holes including all generations of Dell racks. It also supports tooled mounting in 4-post threaded racks and 2-post (Telco) racks for added versatility. The static rails support a wider variety of racks than the sliding rails but do not support serviceability in the rack and are thus not compatible with the CMA. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Notes: Screws are not included in the static rail kit due to the fact that threaded racks are offered with a variety of thread designations. Users must therefore provide their own screws when mounting the static rails in threaded or 2-post racks.Compatible with:
  • PowerEdge R210 FS / R310 FS / R410 / R415
  • PowerVault NX300


Manufacturer Part# : W625M
Dell Part# : 770-BBIF

Compatibility
This product is compatible with the following systems:
PowerEdge R210
PowerEdge R220
PowerEdge R310
PowerEdge R410
PowerEdge R415
snNP03